DID YOU KNOW? Your boiler needs to be of the condensing type in the following areas: England, Wales, Scotland, Northern Ireland, Republic of Ireland, Guernsey and Isle of Man, unless your installer obtains formal exemption from OFTEC.
Engineers registered under the competent persons scheme and registered with OFTEC will be aware of the requirements and whether an exemption may be appropriate. Call 0800 061 4849 now to find a registered boiler technician.
The condensate can be drained at any of these points:
- Internal stack pipe
- Waste pipe
- External drain or gully
- Rainwater hopper that is part of a combined system
- Purpose-made soakaway
The appliance installer will be able to advise you further.
Although oil-fired boilers of below 45kW output can be installed in a loft space, OFTEC recommends that you avoid doing so.
If you intend to install an oil-fired boiler in a loft space, the installation must comply with British Standards to ensure the safe operation of the appliance, the safety of the technicians who may work on it and to protect the fabric of the building against fire and oil contamination.
You will also need to consider:
- The weight of the appliance
- The potential for noise nuisance
- How you will supply oil to it.
- This type of installation should only be considered if there is no alternative location
- The loft space must have a permanent means of access
- The area between the loft access point and the boiler service area, and the service area around the boiler must have permanent flooring that will withstand the weight of the boiler plus a service technician with tools, and must also have a handrail
- The boiler must be of the balanced flue type and stand in a drip tray with a float that will automatically shut off the oil supply when oil is detected in the tray
- You must be able to isolate the appliance and the oil supply from outside the loft space
It is unlikely that your building has no alternative location for the modern range of boilers, but if you opt for this type of installation we would recommend that your installer read and fully understand the requirements of British Standard 5410: Part 1 1997. You must also seek advice from the building insurers and the local fire authorities.
When you upgrade an appliance you are not legally required to change your oil storage tank so that it meets current legislation, unless the appliance installation makes the oil tank less compliant than it might be already. But if you have a fire or pollution incident and your tank does not comply with current legislation, you may find complications with an insurance claim.
We would advise that you consider upgrading your oil storage tank at the time you replace the appliance.